Indicator examples
Ready-to-use indicator setups organized by what you're trying to do. Each section shows which indicators help accomplish a specific trading goal.
For the full indicator reference, see Indicators and Indicator reference.
Catch breakouts
Breakout traders look for price escaping a range with conviction. These indicators help you spot compression, measure the release, and confirm momentum.
Detect the squeeze
Before a breakout, price compresses into a tight range. Bollinger Band width and ADX help you see this squeeze forming.
| What you want | Indicator setup |
|---|---|
| Band compression | BB_WIDTH_PCT × Value — how wide the bands are as a percentage; lower values mean tighter squeeze |
| Low trend strength | ADX × Value — below 20–25 suggests no trending yet |
| TTM squeeze state | KC_SQUEEZE × State — shows when Bollinger Bands are inside Keltner Channels |
Confirm the release
When price breaks out, you need confirmation that momentum is real.
| What you want | Indicator setup |
|---|---|
| Price leaving the band | BB_PCT_B × Value — above 1.0 means price is above the upper band; below 0 means below lower band |
| Volume spike | RVOL × Value — relative volume above 1.5–2.0 confirms participation |
| Momentum surge | CLOSE_CHANGE × Value — the bar's percentage move |
| Donchian channel break | DONCHIAN_UPPER_PRIOR × Distance crosses above 0 — price closed above the prior 20-bar high |
Track the trend after breakout
Once the breakout starts, these help you stay with the move.
| What you want | Indicator setup |
|---|---|
| Break of structure | SWING_FRACTAL_HIGH × Distance crosses above 0 — bullish structure break |
| New higher high | SWING_FRACTAL_HIGH × Value increased — confirms a higher swing high |
| Trend strength building | ADX × Value above 25 and rising (use Trend reading type) |
Buy dips in an uptrend
Mean-reversion traders wait for pullbacks in a trend before entering. These indicators help you identify oversold conditions and spot the turn.
Confirm the trend exists
Only buy dips in a real uptrend — don't catch falling knives.
| What you want | Indicator setup |
|---|---|
| Price above key average | SMA50 × Distance — positive distance means price is above the 50-bar average |
| Moving average alignment | MA_ALIGN × State — shows whether fast MAs are above slow MAs |
| Higher timeframe trend | REGIME_TREND × Value at higher TF — confirms the bigger picture |
Spot the dip
Wait for price to pull back to a good level.
| What you want | Indicator setup |
|---|---|
| RSI oversold | RSI14 × Zone — "oversold" zone means RSI is below 30 |
| Fast RSI extreme | RSI2 × Value — the 2-period RSI is more sensitive; look for values below 10 |
| Touch the average | SMA20 × Distance — when distance approaches 0, price is testing the average |
| Stochastic oversold | STOCH_K × Value — below 20 suggests oversold |
Catch the turn
Confirm the dip is reversing before entering.
| What you want | Indicator setup |
|---|---|
| RSI leaving oversold | RSI14 × Cross above 30 — momentum turning up |
| MACD histogram turn | MACD_HIST × Trend — "rising" after being negative signals momentum shift |
| Stochastic cross | STOCH_K × Cross — bullish cross signals the turn |
| Bullish candle pattern | CANDLE_ENGULFING × Value is "bullish" — price rejection pattern |
Avoid quiet markets
Low volatility and thin participation make for bad trades. These indicators help you filter out dead markets.
Measure volatility
| What you want | Indicator setup |
|---|---|
| Raw volatility | ATR × Value — the average move per candle in price units |
| Comparable volatility | ATR_PCT × Value — volatility as a percentage, so you can compare different coins |
| Volatility rank | ATR_PCT × Rank — where this coin stands vs others; high rank means relatively volatile |
Check participation
| What you want | Indicator setup |
|---|---|
| Absolute volume | VOLUME × Value — raw volume count |
| Relative volume | RVOL × Value — volume compared to the coin's own average; below 0.5 is quiet |
| 24h trading value | NOTIONAL_VOLUME_1D × Value — total dollar volume traded today |
| Volume consistency | VOLUME × Average (24 bars) — smoothed volume to see the trend |
Spot ranging conditions
| What you want | Indicator setup |
|---|---|
| No trend | ADX × Value below 20 — weak directional movement |
| Neutral regime | REGIME_STATE × State — platform's assessment of market condition |
| Flat momentum | RSI14 × Value between 40–60 — neither overbought nor oversold |
Follow the trend
Trend followers want to ride momentum in the direction of the move. These indicators help you identify, confirm, and stay with trends.
Identify the trend
| What you want | Indicator setup |
|---|---|
| Moving average slope | SMA20 × Trend — "rising" confirms uptrend, "falling" confirms downtrend |
| Price vs averages | SMA20 / SMA50 / SMA200 × Distance — positive distance means price above each average |
| EMA crossover | EMA_CROSS × Cross — bullish or bearish cross event |
| Supertrend direction | ST_DIR × Value — enters "bullish" or "bearish" |
Measure trend strength
| What you want | Indicator setup |
|---|---|
| Directional strength | ADX × Value — above 25 is trending; above 40 is strong trend |
| ADX zone | ADX × Zone — "trending" or "extreme" confirms strong direction |
| Regime conviction | REGIME_CONVICTION × Value — platform's confidence in the current regime |
| Regime run length | REGIME_RUN_BARS × Value — how many bars the current regime has held |
Confirm momentum
| What you want | Indicator setup |
|---|---|
| MACD alignment | MACD_LINE × Value above 0 — bullish momentum |
| MACD signal cross | MACD_HIST × Cross — histogram crossing zero confirms direction change |
| Rate of change | ROC12 × Value — positive means price higher than 12 bars ago |
| Money flow | CMF20 × Value — positive Chaikin Money Flow confirms buying pressure |
Trade with the funding
Perpetual traders can use funding rate extremes to find crowded positions and potential reversals.
Read the funding
| What you want | Indicator setup |
|---|---|
| Current rate | FUNDING_RATE × Value — the next funding payment as a percentage |
| Annualized rate | FUNDING_ANN × Value — the rate extrapolated to annual terms |
| Funding label | FUNDING_LABEL × Value — categorical label (high, neutral, negative, etc.) |
Spot extremes
| What you want | Indicator setup |
|---|---|
| High positive funding | FUNDING_RATE × Value above 0.05% — longs paying shorts heavily |
| Negative funding | FUNDING_RATE × Value below -0.01% — shorts paying longs |
| OI + funding combo | OI_PX_REGIME × State — combined open interest and price action classification |
Track open interest
| What you want | Indicator setup |
|---|---|
| Total OI | OI × Value — outstanding contracts |
| OI change | OI_CHG × Value — how OI is moving |
| OI trend | OI × Trend — rising OI with price trend confirms conviction |
Check the reference coin
Sometimes you want to trade altcoins only when BTC or ETH shows strength. Add a reference coin panel to check the major before trading.
BTC as reference
Create a custom panel with BTC as the reference coin, then add indicators like:
| What you want | Indicator setup |
|---|---|
| BTC momentum | RSI14 × Value — check if BTC is oversold or overbought |
| BTC trend | SMA20 × Distance — is BTC above its 20 average? |
| BTC bar change | CLOSE_CHANGE × Value — how BTC moved this bar |
Important: Don't put Rank or crowd indicators on reference panels — the builder blocks these combinations.
Read market structure
Structure indicators help you identify support, resistance, and key price levels.
Swing highs and lows
| What you want | Indicator setup |
|---|---|
| Current structure | SWING_FRACTAL_LABEL × Value — shows HH, HL, LH, LL pattern |
| Distance to swing high | SWING_FRACTAL_HIGH × Distance — how far price is from the last swing high |
| Swing freshness | SWING_FRACTAL_HIGH_BARS_AGO × Value — bars since the swing formed; lower is fresher |
Support and resistance zones
| What you want | Indicator setup |
|---|---|
| Nearest support | nearestZoneDist with side "support" — distance to nearest support zone |
| Nearest resistance | nearestZoneDist with side "resistance" — distance to nearest resistance zone |
| Zone type | nearestZoneType — what kind of zone it is |
| Zone age | nearestZoneAge — hours since the zone was detected |
Session levels
| What you want | Indicator setup |
|---|---|
| Session VWAP | VWAP × Value — volume-weighted average price for the session |
| Distance to VWAP | VWAP × Distance — how far price is from VWAP |
| Point of control | TPO_POC × Value — the price with the most trading activity |
| Value area | TPO_VAH / TPO_VAL × Value — high and low of the value area |
Quick reference panels
Pre-built panel combinations that cover common needs.
Momentum snapshot
A quick read on momentum across multiple indicators:
- RSI14 × Value
- MACD_HIST × Value
- STOCH_K × Value
Volatility and trend
Combines volatility measurement with trend strength:
- ATR × Value
- ADX × Value
- BB_WIDTH_PCT × Value
Squeeze setup
Everything you need to trade Bollinger Band squeezes:
- BB_WIDTH_PCT × Value — "at most X" for compression
- ADX × Value — "below Y" for low trend
- Then release triggers: CLOSE_CHANGE, RVOL, BB_PCT_B
← Indicators · Rules